Installing the Palmrest
1.Align and press the palmrest on the computer until it snaps into place at all sides.
2.Connect the touchpad cable and the
3.Tighten the screws to secure the palmrest to the system board.
4.Flip the computer and tighten the screws to secure the palmrest to the computer.
5.Install:
a.keyboard
b.optical drive
c.hard drive
d.access panel
e.SD card
f.battery
6.Follow the procedures in After Working Inside Your Computer.
Removing the Input/Output (I/O) Board
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a.battery
b.access panel
c.keyboard
d.palmrest
3.Disconnect the I/O cable from the system board. Remove the screw that secures the I/O board to the computer and lift the I/O board from the computer.
19
