Magnavox CCX133AT99 warranty On-Screen Status Displays, On Mode

26 On-Screen Status Displays

A status display, which includes the current time, channel, and other information (see illustration of the status display at right), will appear when you press the STATUS/EXIT button or certain function buttons. You can bring up the status display at any time by pressing the STATUS/EXIT button. Remove the status display by pressing this button again. The contents of the status display may vary.

ON MODE:

●Whenever a function button (REW(ind)/-, PLAY/▲, etc.) is pressed, the status display will appear for five seconds.

COUNTER ONLY MODE:

●When a function button (REW(ind)/-, Play/▲, etc.) is pressed, the status display will appear for five seconds. After five sec- onds, only the counter will remain on-screen. To remove it, choose ON or OFF in the ON-SCREEN MODE menu. (There is an exception. When you press the STOP/▼ button, the sta- tus display will appear for five seconds, then disappear.)

OFF MODE:

●The status display will not appear when you press a function button. The channel number will appear briefly when you select a channel if channels are programmed.

To choose an ON-SCREEN MODE, follow the steps below.

					Function
Channel					Button
	Time				Pressed
		12:00 AM			STOP
		CH10
			SLP	M 1:23:45
	Tape			Counter
	Speed			and
				Counter
				Memory

1

Press the MENU button to display the pop up menu.

2

Press the PLAY/▲ button or the STOP/▼ button to select

VCR SETUP. Then, press the F.FWD/+ button.

3

Press the Number 3 button to select ON-SCREEN MODE.

4

Press the Number 1 button to select ON, the Number 2 button to select COUNTER ONLY, or the Number 3 but- ton to select OFF. Your selection will appear on-screen.

5

Press the STATUS/EXIT button.

Helpful Hints

•If the channel you select has no broadcast, the screen will be solid blue. The screen will remain blue until you select an active channel.

•Channel numbers (when tuned) appear on-screen for a few seconds.

•The channel number will remain on- screen at all times (except during tape playback) if REMINDER is set to ON. Details are on page 27.

•You cannot view closed captions of a tape when the TV/VCR is in Counter Only mode. The counter display will replace the closed captioning display on the TV/VCR screen. Details are on pages 42 - 43.