Connections
Connection to an Audio System
•When you change the connections, all devices should be turned off.
•Refer to the operation manual accompanying external devices for more information.
AUDIO
Method 1
Stereo system
Method 2
Dolby Digital decoder, MD deck or DAT deck
Audio cable (supplied)
This unit
<REAR PANEL>
AUDIO OUT
Analog audio input jacks
DVD/VCR |
IN - AUDIO - OUT |
L |
R
or
DVD
AUDIO
OUT
L
R
COAXIAL Digital audio
input jack
Audio Coaxial Digital cable | DVD | |
(commercially available) | ||
AUDIO OUT | ||
| DIGITAL |
DIGITAL | COAXIAL |
| |
AUDIO OUT |
|
Setting | Setup>Playback>Disc Audio>Digital Out> | |
Connection | PCM | Dolby Digital |
If output is Dolby Digital
encoded audio, connect to a - STREAM Dolby Digital decoder.
Unless connected to a Dolby | - | PCM |
Digital decoder. | ||
Connecting to an MD deck or |
|
|
DAT deck. | - | PCM |
* To complete these settings, refer to pages
Note
•Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.
Note
•By connecting this unit to a
•The audio source on a disc in a Dolby Digital Multi- channel surround format cannot be recorded as digital sound by an MD or DAT deck.
•Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.
16 EN