Magnavox cmwR20v6 Settings for an external source cont’d, Setting a disc to protect, Recording

Recording

Settings for an external source (cont’d)

Recording from an external source

+VR	+VR	VCR
DVD+RW DVD+R DVD-RW	DVD-R

Before recording from an external source, see the instructions for the connection on page 35.

1.Turn on the TV and press [STANDBY-ON ] and be sure to select the input of the TV to which the unit is connected.

Refer to the table on page 15. DVD

2.When you want to record to the disc: Press:

Press [OPEN/CLOSE A] to open the disc tray. Place the disc to record properly.

3.Press [OPEN/CLOSE A] to close the disc tray.

This operation may take a while to be recognized.		VCR
When you want to record to a videotape:	Press:

Insert the videotape with a record tab into the cassette compartment.

4.Select the input of the unit which the external equipment is connected. (E2 or E1)

•To use the input jacks on the back of this unit, select “E1” position by pressing [0], [0], [1] with the Number buttons or using

[CHANNEL - /+] on the remote control, or [CHANNEL L / K] on the front panel.

•To use the input jacks on the front of this unit, select “E2” position by pressing [0], [0], [2] with the Number buttons or using

[CHANNEL - /+] on the remote control, or [CHANNEL L / K] on the

front panel.

5.Select a recording mode by pressing [REC MODE].

Refer to “Recording mode” on page 25 for DVD or page 74 for VCR.

6.Press [DVD REC I] ([VCR REC I]) on the remote control or [RECORD I] (DVD/VCR) on the front panel to start recording.

7.Press “Play” on the external source to record from.

8.For disc:

Press [STOP C] on the remote control or on the front panel to stop recording.

This operation may take a while to be completed.

For videotape:

Press [STOP C] on the remote control or [STOP C / EJECT A] on the front panel to stop recording.

			STANDBY-ON		1
	VIDEO/TV	VCR	DVD	OPEN/CLOSE
	.@/:	ABC		DEF	2
4	1	2		3
	GHI	JKL		MNO
	4	5		6	3
	PQRS	TUV		WXYZ
	7	8		9
	CLEAR/C-RESET SPACE			TITLE
		0
	RETURN			DISPLAY
		OK
	DISC MENU			SETUP
					8
		CHANNEL
	TIMER	VCR REC	DVD REC	REC MODE	5
	TIMER SET	SLOW	CM SKIP	RAPID PLAY
6	SEARCH	AUDIO	DUBBING

2 3

OPEN/CLOSE

REW F.FWD STOP/EJECT PLAY RECORD IRCHANNELD.DUBBING VCR SOURCE DVD STOP PLAY RECORD

8 6 4 8 6

Setting a disc to protect

+VR

DVD+RW DVD+R DVD-RW

+VR

DVD-R

To prevent accidental recording, editing or erasing the titles, you can protect them from the Setup menu.

1

Press [SETUP].

2

Using [K / L], select “Disc Edit”. Press [OK].

Disc menu will appear.

3

Using [K / L], select “Disc Protect OFF ON”. Press [OK].

Confirmation window will appear.

Disc Protect OFFON

Yes

No

4

Using [K / L], select “Yes”. Press [OK].

A disc will be protected.

This operation may take a while to be completed.

	RETURN	DISPLAY
2		OK	1
3	DISC MENU	SETUP
4

Note

To cancel the disc protect:

•When you insert a disc protected with this unit,

“Disc Protect ON OFF” will appear instead of “OFF ON”.

Disc Protect ONOFF

Yes

No

To release the protect for the disc, select “Disc Protect ON OFF” at step 3, then select “Yes”.

36 EN