Hooking Up the TV/VCR (cont’d) 7
DHooking Up Your TV/VCR to Another Video Source (VCR or Camcorder) You may need this connection if you want to copy tapes or view tapes that you are playing on the VCR or camcorder. Select channel 00 (AUX) at the TV/VCR when viewing tapes that are playing on the VCR or camcorder. Details are on page 30.
AUDIO/VIDEO OUT Jacks on VCR
3CH 
IN 4CH
AUDIO VIDEO
OUT ANT.
INOUT 
Connect an Audio cable to the AUDIO OUT Jack on the VCR and to the AUDIO In Jack on the front of the TV/VCR.
VIDEO AUDIO
3CH | IN | |
4CH | ||
|
AUDIO VIDEO
OUT ANT.
INOUT
AUDIO/VIDEO In Jacks on front of TV/VCR
Connect a Video cable to the VIDEO OUT Jack on the VCR and to the VIDEO In Jack on the front of the TV/VCR.
2
3
When all other connections are complete, plug in the TV/VCR’s power cord.
Before you turn on the TV/VCR, go to page eight.
Helpful Hints
•Before connecting an antenna or cable signal to the ANT(enna) Jack, make sure the pin is not bent. If the pin is bent, straighten it as illustrated, then connect the antenna or cable signal to the ANT(enna) Jack.
•Audio and video cables are not supplied.
Bent pin
Crooked Pin | Straight Pin |
