Magnavox MDR533H Setting The Clock, zone, then press OK, Note for auto clock setting, below

SETTING THE CLOCK

Manual Auto Clock Setting		7	Use [K / L] to select the desired time
If the unit chooses an incorrect PBS channel on Cable			zone, then press [OK].
TV, set the PBS channel manually by following the steps
				Time Zone
below.					Atlantic
1	Select “Manual” at step 4 in “Analog				Eastern
					Central
	Auto Clock Setting” on page 32, then
					Mountain
	press [OK].				Pacific
					Alaska
					Hawaii

Introduction Connections

2Use [the Number buttons] or [K / L] to enter your Cable TV Analog PBS channel number, then press [OK].

Set Channel No.

CH1

Press [MENU] to exit and turn the

3 unit to the standby mode.

Digital Auto Clock Setting

Press [MENU] to exit and turn the

8 unit to the standby mode.

This unit will search for the time only when the power is in the standby mode. Initially leave it in standby mode for at least 15 minutes to give this unit time to set the clock. Once the clock is set, the unit receives the clock data at 12:00 am & 12:00 pm when unit is in standby mode. Check the time after the Auto Clock was set, if it is incorrect time then set the “Auto Clock Setting“ to “OFF” in step 4 above. Then try “Manual Clock Setting“ on page 34.

Note for auto clock setting

Basic Setup Recording

1	Press [MENU] and use [K / L] to select
	“General Setting”, then press [OK].
	“General Setting” menu will appear.

2Use [K / L] to select “Clock”, thenpress [OK].“Clock” menu will appear.

3Use [K / L] to select “Auto Clock

Setting”, then press [OK].

•The clock may set itself automatically after this unit receives the antenna/cable signal and plug in the power cord.

•If the clock is not set correctly, timer recording does not work properly.

•Analog off the air broadcasts have ended. Analog auto clock setting will no longer be available except via Cable TV. Try digital auto clock setting in this case.

•For Digital auto clock setting, incorrect time may be obtained depending on the broadcast information. If this occurs, set the “Auto Clock Setting“ to “OFF” at step 4 and try “Manual Clock Setting“ on page 34

Playback

Editing

4Use [K / L] to select “Manual”, thenpress [OK].Auto Clock Setting

OFF

Auto

Manual

Enable Manual operation to select the DTV Channel for receiving the Clock Data and selecting your Time Zone below.

5Press [{ ] to highlight “CH”. Press [K / L] to select “DTV”, then press[ B] .

Set Channel No.

DTV 1

Time adjustment for each time zone

Atlantic	GMT (Greenwich Mean Time ) - 4 hours
Eastern	GMT (Greenwich Mean Time ) - 5 hours
Central	GMT (Greenwich Mean Time ) - 6 hours
Mountain	GMT (Greenwich Mean Time ) - 7 hours
Pacific	GMT (Greenwich Mean Time ) - 8 hours
Alaska	GMT (Greenwich Mean Time ) - 9 hours
Hawaii	GMT (Greenwich Mean Time ) - 10 hours

Function Setup Others

6Use [the Number buttons] or [K / L] to enter the desired major channel number to receive the Clock Data, then press [OK].

Español

EN 33