Magnavox MDR535H, MDR533H, MDR537H owner manual Supplied Accessories, Maintenance

SAFETY INFORMATION

Supplied Accessories

Remote Control (NC003UD / NC003UH) with AA (1.5 V) battery x2

RF coaxial cable

RCA audio/video cables

Owner’s Manual

Owner’s Manual

Quick Start Guide

Maintenance

Servicing

•Please refer to relevant topics on “TROUBLESHOOTING” on pages 116-120 before returning the product.

•If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn the unit to the standby mode, unplug the power plug and please call our help line mentioned on the front page to locate an Authorized Service Center.

Cleaning the cabinet

•Wipe the front panel and other exterior surfaces of the unit with a soft cloth.

•Never use a solvent, thinner, benzene or alcohol to clean the unit. Do not spray insecticide liquid near the unit. Such chemicals may discolor the surface or damage the unit.

Cleaning discs

•When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion.

•Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records.

Cleaning the disc lens

•If this unit still does not perform properly although you refer to the relevant sections and to “TROUBLESHOOTING” in this owner's manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.

Disc handling

•Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.

•Always store the disc in its protective case when it is not used.

HDD handling

•HDD is a precision apparatus that is susceptible to vibration, strong impact or dirt. Depending on the installation environment or handling, the unit may become partially damaged or in the worst case, recording or replaying may not be available. Especially while the HDD is in motion, do not subject it to vibration or strong impact or pull out the power plug. And if a power failure occurs, the content of the recording / replaying program may be lost.

•HDD rotates at high speed when in operation. Be sure that rotation has stopped and then move the unit without subjecting it to strong impact or vibration.

IR signal check

If the remote control does not work properly, you can test if the remote control sends out the infrared signal with

a digital camera. (With a digital camera or cellular phone including built-in camera.)

1Turn on the digital camera.

2 Direct a digital camera to remote control, then press and hold a button on the remote control.

• If infrared light appears through digital camera, the remote control is working.

Note

•Cannot guarantee about 3rd party’s remote controls. Please contact the remote manufacturer if you have any problem with it.

4EN