Magnavox MDV443 Playinga Disc, Remember, this DVD Player will play only certain Discs, Details

								Playinga Disc 15
eeeeeeeeoeeeeeem			meeeeeeeeeeeeeeeoeeeeeem			meeeeeeeeeeeeeeeoeeeeeem	meeeeeeeeeeeeeeeoeeeeeem	meeeeeeeeeeeeeeeoeeee
Before you begin, turn on the power of the TV, stereo, and
any	other	equipment		connected	to the	DVD Player. Make
sure	the	TV	and the	stereo (if applicable)		are set to the cor-	_
rect	channel.		Details	are on pages	8-14.

Press STANDBY-ON to turn on the DVD

Player. P-ON will appear briefly on the display panel.

Press OPEN/CLOSE _ to open the Disc tray.

Place a Disc into the tray. If the DVD is recorded

on only one side, place the Disc in the tray with the

label facing up and the shiny side facing down. Some DVDs are recorded on both sides. Make sure the

label of the side you want to play is facing up.

Press Play I_ to close the tray. The tray will close and play will begin at the first Chapter or Track. If a DVD menu appears instead, see page 20. With some Audio CDs, playback will not begin unless you press Play I_ again.

With MP3 and JPEG files, play will begin at Track 1 or when you select an item and press Play I_. Details are on page 29.

You also can close the tray by pressing OPEN/CLOSE _.

Press Stop • to stop playback.

Remember, this DVD Player

will play only certain Discs•

See page six for details•

HelpfulHints

•An "X" may appear in the top right corner of the TV screen when you try a feature. This

means either the feature you tried is not available on the Disc,or the

Player cannot access the feature at this time. This does not indicate a problem with the Player.

•If a Disc is dirty or has scratches, the pictures may appear distorted and play may stop. In such cases, remove the Disc and turn off the Player. Unplug the power cord,

then reconnect it to the power outlet. Clean the Disc,then turn

on the Player again and reinsert the Disc for playback.

•If a Disc has multiple layers, the picture may freeze occasionally. This happens when the first layer switches to the second layer. This is not a malfunction.