Magnavox MDV443 owner manual TV has AUDIO red and white and S-VIDEO IN jacks

Connecting the DVD Player to a TV only

TV has AUDIO (red and white) and S-VIDEOIN jacks

Back of TV (example only)

DVD Player

Connect the supplied red and white audio cables to the red and white

AUDIO OUT jacks on the DVD Player and to the red and white AUDIO IN jacks on the TV. Match the cable colors to the jack

colors. The right jack is red; the left jack is white.

Connect an S-Video cable (not supplied) to the S-VIDEO OUT jack

on the DVD Player and to the S-VIDEO IN jack on the TV.

Connect the TV's power cord to a power outlet.

Turn on the TV and set it to the S-VIDEO IN channel.

This channel is usually near channel zero, or your TV's remote control may

have a button or switch that lets you select the S-Video In channel. Or, go to your lowest TV channel (01 or 02) and change channels downward until you find the S-Video In channel. If you cannot find the S-Video In channel, check

your TV owner's manual.

Connect the DVD Player's power cord to a power outlet.

Press the STANDBY-ONbutton to turn on the DVD Player.

You should see the DVD logo on the TV screen. If you do not, check your con- nections and make sure the TV is on the correct S-Video In channel.