Magnavox MDV443 owner manual Hookups contd, Audio In, jack on your Television

Hookups (cont'd) 9

Back of RF Modulator

(example only)

@

ANTENNAIN

RFIN

Antenna	or
Cable TV	Signal	DVD Player

Before you begin, make sure you have an RF modulator and extra RF coaxial cables. These are not

supplied with the Player, but are available from Magnavox or most consumer electronics retailers.

Connect the supplied video cable (yellow) to the Player's yellow VIDEO OUT jack and

to the VIDEO IN jack on the RF modulator. The VIDEO IN jack on the RF modulator is usu-

ally yellow and might be labelled VIDEO, CVBS, COMPOSITE, or BASEBAND.

Connect

the supplied

audio

cable

(red

and white)

to

the

Player's

red and

white

AUDIO

OUT

(left

and

right)jacks.

Connect

the

other

ends

of

the

audio

cable

to

the

AUDIO IN

jacks

on

the

RF modulator.

Audio jacks

on

the

RF modulator

usually

are red

(right)

and

white

(left). Match

the

cable

colors to

the jack

colors.

You probably already have an Antenna or Cable TV signal connected to the ANTENNA IN jack on

your TV. Disconnect it now from the TV. Reconnect the Antenna or Cable TV signal to the ANTENNA IN jack on your RF modulator.

Connect an RF coaxial cable (not supplied) to the RF OUT, ANTENNA OUT, or TO

TVjack on the RF modulator. The RF OUT jack may be labelled differently among different

brands, Refer to the instructions provided with your RF modulator,

Connect the other end of the same RF coaxial cable to the ANTENNA IN or RF IN

jack on your Television.

Your RF Modulator should have a Channel 3/4 switch. The setting of this switch determines the TV channel on which you will watch materials playing on the DVD Player.

Set the RF Modulator's Channel 3/4 switch to either 3 or 4, whichever TV channel is

least used in your area. If your RF modulator has a Modulator/Antenna switch, set it accordingly.

Refer to the instructions that came with the RF Modulator.

Turn on your TV and choose channel 3 or 4. Choose the same channel to which you set the RF Modulator's Channel 3/4 switch.

Connect the Player's power cord to a power outlet. Press STANDBY-ON button to turn

on the Player. If no Disc is in the Player, you should see the Player's screen saver on the TV screen.