Magnavox MDV443 Hookupscontd, Connecting to a TV and a Stereo Stereo has red/white AUDIO IN jacks

Hookups(cont'd) 13

Illlllllllllllel leeeeeeellllllllllllllel leeeeeeellllllllllllllel leeeeeeellllllllllllllel leeeeeeelllllllllllll

Connecting to a TV and a Stereo

Stereo has red/white AUDIO IN jacks

Back of TV (example only)

BackofStereo

(example only)

Connect the supplied red and white audio cables to

the Player's red and white AUDIO OUT jacks and

to the Stereo's red and white AUDIO IN jacks, Match the cable colors to the jack colors. The right jack is red; the left jack is white.

Connect the supplied yellow video cable to the

Player's yellow VIDEO OUT jack and to the TV's VIDEO IN jack. You may use S-Video or Component Video instead. See pages 77-72 for these optional video con- nections. Remember, you only need one video connection between the TV and the DVD Player.

Plug	in the	Stereo's	power cord. Turn			on	the
Stereo and		select the Auxiliary			IN station. During
Disc	playback, you will		adjust	the volume at		the	Stereo. See
your	Stereo	owner's manual		for	details.

Plug in the TV's power cord. Turn on the TV and set it to the correct Video In channel. This channel

may be labeled A/V or Audio/Video, Aux or Auxiliary, EXT or External, etc. This channel is usually near channel zero, or your TV'sremote control may have a button or switch that lets you select the Video In channel. Or, go to your lowest TV channel (01 or 02) and change channels down- ward until you find the Video In channel. If you cannot find the Video In channel, check your TV owner's manual.

Connect the Player's power cord to a power outlet.

Press STANDBY-ON button to turn on the Player.

You should see the DVD logo on the TV screen. If not, check your connections and set the TV to the correct channel.