Magnavox MRD430B owner manual Before You Start, Initial Setup

5.BEFORE YOU START

5.1. Finding a Viewing Video Source Input on Your TV

After you have completed all of the connections to your TV, review the steps below.

1.Press [(POWER-ON)]to Turn On the unit.

2.Turn On your TV.

3.Please locate the Source / Input / AUX / Video button on TV's remote control. The button may vary on the TV brand and model. Once you have located the button, press until you see “Please Wait...” or the Initial Setup Menu on the Screen.

Please Wait...

This is the correct viewing of the video Source Input.

•If the TV is connected by an HDMI cable, it may take a few moments for the opening picture to appear.

•If a certain amount of time has passed since you Turned On the unit, welcome screen only appears the first time you Turn On the unit.

5.2. Initial Setup

Please follow the instructions below to complete the initial setup.

1.While welcome screen is displayed, use [] to select “Next”, then press [OK].

2.Language setup screen will appear. Use [] to select your language, then press [OK].

Language

Please select your language for on-screen display.

English

Español

Français

Return

3. “Quick Start Mode” screen will appear. Use [] to select the desired mode, then press [OK].

continued on next page

EN - 14