Magnavox MRD430B owner manual Cannot load a Blu-rayDisc stuck in

Problem	Tip
Cannot load a Blu-ray Disc™ (stuck in	Unplug unit from AC outlet for 20 seconds. Plug unit back in and press the
“Loading…” mode) and cannot Open the disc	[ (OPEN/CLOSE)] on the unit to eject the disc.
tray to eject the disc.
The software update screen appears after	Please complete the software update.
turning On the unit.
	When the software update has failed, the software update screen will keep
	appearing after turning the unit on. If the software update continues failing,
	please try it by using a USB Memory Stick with the update software installed
	in its root directory. In this case, please change the file name as below.
	“E****UD10000FA1.bin” “UPDATE10000FA1.BIN”
	Do not change the numbers. The file name is case sensitive.
Cannot read a USB Memory Stick.	The format of the USB Memory Stick is not compatible with this unit.
	Please try and format it on this unit (All data will be deleted).
Cannot play back JPEG files from a disc.	Cannot play back JPEG files from a disc. Make sure that the disc was
	recorded in the UDF, ISO9660 or JOLIET format.
Cannot find a JPEG file.	Make sure that the selected Group (folder) does not contain more than
	9,999 files for Blu-ray Disc™ / DVD / USB Memory Stick and 999 files for
	CD.
	Make sure that the file extension is .jpg / .JPG / .jpeg / or .JPEG.
No 5.1-channel audio from the speaker	Does the disc contain 5.1-channel audio? The 5.1-channel audio is only
system.	available when the disc contains it.
	Set “Audio Output” to “Speakers” in “Settings”.
	Press [MODE] then check to see if the surround mode is not set to “2.1ch
	Stereo”.
Video and Audio from the supplied speakers	Set the audio delay time (0 - 300 ms) in “Audio Sync” under “Audio¬Out” in
are not synchronized.	“Settings”. “Audio Sync” only functions when the supplied speakers are
	connected to the unit using 5.1ch sound audio output.
No Audio from the speaker system.	Increase the volume level of the speaker system.
	Set “Audio Output” to “Speakers” in “Settings”.
	Make sure that audio is not muted.
	Make sure you have selected the correct active Source for external audio Input.

DNote

•Do not attempt to repair the Blu-ray™ Home Cinema yourself. This may cause severe injury, irreparable damage to your Blu-ray™ Home Cinema and void your warranty.

•Please have available your Blu-ray™ Home Cinema model and serial number before contacting us. These numbers are available on the cabinet, as well as on the packaging.

EN

EN - 45