Magnavox MRD430B owner manual Connections, Placing the Speakers, Connection to a TV, Subwoofer

4.CONNECTIONS

4.1. Placing the Speakers

Make the following connection to ensure an optimum sound experience.

REAR LEFT

FRONT LEFT

CENTER FRONT RIGHT

REAR RIGHT

SUBWOOFER

1.Place the main unit near to the TV.

2.Place the speakers system at normal listening ear-level and directly parallel to the listening area.

3.Place the subwoofer at the corner of the room or at least 3.3 feet (1 meter) away from the TV.

DNote

•The placement diagram shown here is only a guideline that provides great system performance. You may find other placement choices that are more suitable for your room layout that provide the sound experience you enjoy.

•To avoid magnetic interference, never position the front speakers too close to your CRT Picture Tube TV.

•The rear speakers are labeled as REAR LEFT or REAR RIGHT.

•The front speakers are labeled as FRONT LEFT or FRONT RIGHT.

•For speaker setup, refer to “Speaker Setup” on page 32.

4.2. Connection to a TV

„HDMI Connection (Supports up to 1080i(*1), 1080p(*2), 1080p/24(*3) resolution.)

Your TV

SPEAKERS( 3Ω )

REAR FRONT

SUB- FRONT

WOOFER CENTER R L R L

+

-

VIDEO	AUDIO IN
OUT	AUX

R

DIGITAL
AUDIO IN	L
COAXIAL

HDMI OUT

HDMI cable

(not supplied)

HDMI OUT

HDMI IN

No Analog Audio connection is required as Digital Audio is included with HDMI cable signal.

(*1)	1080i:	Outputs video data with a frame rate of 30 frames per second.
(*2)	1080p:	Outputs video data with a frame rate of 60 frames per second.
(*3)	1080p/24:	Outputs video data with a frame rate of 24 frames per second.

•Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the connector are matched.

•When connected to an HDCP incompatible display device, the picture will not be displayed properly.

•Use an HDMI cable with the HDMI logo (a certified HDMI cable) for this connection. High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for better compatibility.

DNote

•If the TV receives no Audio / Video signal after properly connecting the unit and the TV with an HDMI cable, it may be the TV. Please refer to the TV’s user’s manual.

•If the TV receives no Audio signal after properly connecting the unit and the TV with an HDMI cable, make sure the TV input is not an HDMI-DVI Input terminal.

continued on next page

EN - 10