20 Quick Videotape Playback
Read and follow the steps below to play a videotape.
1Turn on the TV.Set it to channel 3 or 4 or its AUDIO/VIDEO
IN channel.This depends on how you connected the Recorder to a
TV.See pages 10-14.
2With the Recorder power off,insert a videotape in the cas-
sette compartment of the Recorder.The VCR light will appear on
the front of the Recorder.
If the power is already on,press VCR to put the Recorder in VCR
mode.The VCR light will appear on the front of the Recorder.
3Press PLAY B.
4Press STOP Cto stop playback.
5Press PREV/REW Hto rewind the videotape.
6After the videotape stops,press OPEN/CLOSE/EJECT Ato
remove the videotape.
• You must connect the Recorder
to a TV using the RF coaxial
cable or composite video in
order to use the VCR features.
These hookups are explained on
pages 10 and 14.
Helpful Hint
1
2
Turn on the TV.
Insert a videotape in the
cassette compartment.
4
6
53
E9490UD_EN.qx3 04.8.3 11:55 AM Page 20