Clock Setting (cont’d) 31
Time/Date Manual
If the Recorder does not set the time and date correctly using the
Time/Date Automatic feature,set the clock manually by following the steps
below.Manual clock setting overrides Automatic clock setting.
Make sure the Recorder is in DVD mode.Press DVD so the DVD light
appears on the front of the Recorder.
1Press SYSTEM MENU.Press sto select in the top left
corner of the menu bar at the top of the TV screen.
2Press Lrepeatedly to select at the end of the sec-
ond menu,then press Bto enter the Installation menu.
3Press Lrepeatedly to select Time/Date,then press B.
4Press Lto choose Manual,then press B.
5Time will be highlighted. Press sor Bto choose the correct
time in hours and minutes,then press OK.Or, press the
Number buttons to quickly enter the time in hours and minutes,
then press OK.
6Press Lto choose AM/PM,then press sor Bto choose
AM or PM.Press OK.
7Press Lto choose Year,then press sor Bto choose the
current year.Press OK.
8Press Lto choose Month,then press sor Bto choose
the current month.Press OK.
9Press Lto choose Date,then press sor Bto choose the
current date.Press OK.
10 Press Lto choose Daylight Saving,then press sor Bto
choose On or Off.Press OK.
11 Press SYSTEM MENU repeatedly to remove all menus.
Time/date
Manual
K
u Time s04:01 B
LAM/PM PM
Year 2004
Month 06
Date 19
Daylight Saving On
To exit press
SYSTEM MENU
In order for the clock to remain
set as you specified manually,
you may need to set Daylight
Saving to Off.
If you set up channels again as
described on page 28,you may
need to reset your clock.
If you change any item manual-
ly (Time,AM/PM,Year, Month,
Date, Daylight Saving),PBS
Channel will change to Off
automatically.See page 30.
Helpful Hints
1-10
1,11
E9490UD_EN.qx3 04.8.3 11:55 AM Page 31