Night Mode, Remote Control Used 67
Remote Control Used
1Press SYSTEM MENU.Press sto select in the top left
corner of the menu bar at the top of the TV screen.
2Press Lrepeatedly to select in the second menu screen,
then press B.
3Remote control used will be highlighted. Press B.
4Press Kor Lto select DVD Player or DVDRecorder,then
press OK.The factory setting is DVD Recorder.By selecting DVD
Recorder,you choose to operate the Recorder with its supplied
remote control (as shown at right and throughout this book).If you
have a Magnavox DVD Player and want to use its remote for the
Recorder,select DVD Player.You might not access all the Recorder’s
features unless you use the Recorder’s remote.
5Press SYSTEM MENU to remove the menus.
W X Y Z a
121en off no off
~
Remote control
Remote control used sDVD Player L
DVD Recorder
Night Mode
Turn on Night Mode to improve the sound during low volume playback.
Before you begin,make sure the Recorder is in DVD mode. Press DVD so
the DVD light appears on the front of the Recorder.
1Press SYSTEM MENU.Press sto select in the top left
corner of the menu bar at the top of the TV screen.
2Press Lrepeatedly to select G,then press B.
3Press Lrepeatedly to select Night mode,then press B.
4Press Kor Lto select On or Off,then press OK.
5Press SYSTEM MENU to remove the menus.
W X Y Z a
121en off no off
Sound
Digital output
GAnalog output
Night mode sOn L
r
Off
~
1,5
1-4
1,5
1-4
E9490UD_EN.qx3 04.8.3 11:55 AM Page 67