72 Rerecording (Tape Duplication)
•If you use the AUDIO and VIDEO
IN jacks on the back of Recorder
2,press
CHANNEL +/-
to select
EXT2 at step 5.EXT2 will
appear on the TV screen.
•If you use the AUDIO and VIDEO
In jacks on the front of Recorder
2,press
CHANNEL +/-
to select
CAM1 at step 5.C AM1 will
appear on the TV screen.
•Unauthorized recording of copy-
righted television programs,video
tapes, or other materials may
infringe on the rights of copyright
owners and violate copyright
laws.
•If a program has copyright pro-
tection,it may not record clearly.
Helpful Hints
1Make the connections shown above.
2Recorder 1 will play your tape. Put a prerecorded tape into the
cassette compartment of Recorder 1.Press VCR to put the
unit in VCR mode if necessary.
3Recorder 2 will record your tape. Insert a blank tape in the cas-
sette compartment of Recorder 2.Press VCR to put the unit in
VCR mode if necessary.
4Turn on the TV and set it to channel 03.(To use channel 04
instead,see page 10.)
5Point the remote control at Recorder 2.Press CHANNEL
+/- to select EXT2 or CAM1.(See Helpful Hints at right.)
6Press REC SPEED/MODE to select SP or SLP as the tape
recording speed at Recorder 2.
7Press RECORD I(VCR) on the front of Recorder 2 then
press PLAY B(VCR) on the front of Recorder 1.
To stop recording, press STOP C/ EJECT A(VCR) on Recorder 1,
then press STOP C/ EJECT A(VCR) on Recorder 2.
Recorder 1
Playing unit
Recorder 2
Recording unit 3. RF coaxial cable from the
(Antenna) OUT jack of Recorder
2 to the TV’s ANTENNA IN jack
These instructions show you how to copy videotapes.The illustration uses two Recorders.Other VCRs or Camcorders may oper-
ate differently.
2.Video cable from yellow
VIDEO OUT jack of
Recorder 1 to VIDEO IN
jack of Recorder 2
1.Audio cables from AUDIO OUT jacks (red and white) of
Recorder 1 to AUDIO IN jacks of Recorder 2
E9490UD_EN.qx3 04.8.3 11:55 AM Page 72