To prevent recording, break off the tab with a screw- driver.

mvr630mg.QX33 2/11/02 12:05 PM Page 5

Before Using Your VCR 5

Putting Batteries in the Remote Control

1 Remove the battery compartment lid on the bottom of the remote control by sliding it in the direction of the arrow.

2 Place two AA batteries inside the battery compart- ment with their + and – ends aligned as indicated.

3 Replace the battery compartment lid.

Battery Safety

Battery Usage CAUTION - To prevent battery leakage that may result in bodily injury or damage to the unit:

Install ALL batteries correctly, with the + and - markings on the battery aligned as indicated on the unit;

Do not mix batteries, for example, old with new or carbon with alkaline; and

Remove batteries when the unit will not be used for a long time.

1

2

3

Recording Prevention

Video cassette tapes have record tabs to ensure you do not accidentally erase recordings.

1

2 To allow recording, cover the hole with cellophane tape.

VCR maintenance

Use only tapes with the mark.

Remove any light adhesive stick-on notes from the video cas- sette tape before putting the tape in the VCR. Removable labels can jam the VCR.

The VCR requires periodic maintenance to maintain its excellent performance. This VCR has an Automatic Head Cleaner. However, you may have to replace the video heads eventually. Only an authorized service center should perform this service.

1

2

Page 5
Image 5
Magnavox MVR430MG Before Using Your VCR, Putting Batteries in the Remote Control, Battery Safety, Recording Prevention