mvr630mg.QX33 2/11/02 12:05 PM Page 8
8 Hookups With a Cable Box/Direct Broadcast System
There are two ways to connect your Cable Box/DBS to the VCR. With this connection:
●You may view any channel.
●You must select channels at the Cable Box/DBS. Channels cannot be changed at the VCR.
●You may not view a channel other than the one you are recording.
●You may not program channels at the VCR.
●You can only program a timer recording for one channel at a time. Set the TV and the VCR to the Cable Box/DBS output channel (channel 03 or 04); set the CH3/CH4 switch on the back of the VCR to the same channel. Set your Cable Box/DBS to the channel you want to record. When you enter the channel you want to record in a timer recording, select channel 03 or 04 (the Cable Box/DBS output channel). (This is step 5 on page 29.) Leave the Cable Box/DBS on for a timer recording.
1 Cable Box/DBS | 2 VCR |
| 75 |
|
|
| AN |
|
|
| T / |
|
|
| CA |
|
|
| BLE |
Cable |
| RF coaxial |
|
| cable |
| |
Signal |
| 3 | TV’s |
RF coaxial |
| ||
cable |
| ANTENNA IN | |
|
| Jack |
Connections
1
2
3
Connect a Cable signal to the IN Jack on the Cable Box/DBS.
Use the supplied black RF coaxial cable to connect the OUT Jack on the Cable Box/DBS to the ANT(enna) IN Jack on the VCR.
Use a second RF coaxial cable (not supplied) to connect the OUT Jack on the VCR to the TV’s ANTENNA IN Jack.
Recording/Viewing Any Channel
1 With the VCR on and in VCR position (the VCR/TV light will appear on the display panel), use the CH(annel) o/p button to set the VCR to the Cable Box/DBS output channel (channel 03 or 04). Set the CH3/CH4 switch on the back of the VCR to the same chan- nel.
2 Set the TV to the same channel to which you set the VCR.
3 Select the channel you want to view/record at the Cable Box/DBS.
