mvr630mg.QX33 2/11/02 12:05 PM Page 32
32Rerecording (Tape Duplication)
1.Audio cables from AUDIO OUT Jacks of VCR 1 to AUDIO IN Jacks of VCR 2
VCR 1
Playing VCR
VCR 2 - Recording VCR
2.Video cable from VIDEO OUT Jack of VCR 1 to VIDEO IN Jack of VCR 2
●Audio and Video cables are not supplied.
3.RF coaxial cable from the OUT jack of
VCR 2 to the TV’s ANTENNA IN Jack
1 Make the connections shown above.
2 VCR 1 will play your tape. Put a prerecorded tape in
VCR 1.
3 VCR 2 will record your tape. Insert a blank tape inVCR 2. The VCR must be in VCR position. (The VCR/TV light will appear on the display panel. If it does not, press the VCR/TV button once.)
4 Turn on the TV and set it to channel 03 or 04, whichever channel the CH3/CH4 switch on VCR 2 is set to.
5 Point the remote control at VCR 2. Press the Number buttons 0, 0, 1 or 0, 0, 2. (See Helpful Hints at right.)
6 Press the SPEED button to select SP or SLP at VCR 2.
7 Press the PLAY button on VCR 1 and the RECORD button on VCR 2 at the same time.
To stop recording, press the Stop/Eject C/Abutton on VCR 1, then press the Stop/Eject C/A button on VCR 2.
Helpful Hints
•If you use the AUDIO and VIDEO IN Jacks on the back of VCR 2, press Number buttons 0, 0, 1 at step 5. AV REAR will appear on the TV screen.
•If you use the AUDIO and VIDEO In Jacks on the front of VCR 2, press Number buttons 0, 0, 2 at step 5. AV FRONT will appear on the TV screen.
•Unauthorized recording of copy- righted television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws.
•If a program has copyright protec- tion, it may not record clearly.
•These instructions show you how to copy tapes using two MVR630MG VCRs. Different VCRs may operate differently.
•If you have the MVR430MG, you only need one audio cable to con- nect the single AUDIO OUT jack on VCR1 to the AUDIO IN jack on VCR2.
