Nikon D2H manual Replacing the Focusing Screen, 238, Replacing Focusing Screens

Technical Notes—Caring for the Camera

Replacing the Focusing Screen

The D2H is supplied with type B BriteView focusing screen. An optional type E clear-matte Fresnel screen is available for tracing and architectural photog- raphy ( 232). To change focusing screens:

1 Turn the camera off and remove the lens.

2 Using the tweezers supplied with the focusing screen, pull the focusing screen latch towards you. The screen holder will spring open.

3 Remove the existing screen, using the sup- plied tweezers and being careful to handle the screen by the tab to avoid scratches.

4 Using the tweezers and handling the screen by the tab, set the replacement screen in the holder.

5 Push the front edge of holder upward until it clicks into place.

Replacing Focusing Screens

Do not touch the surface of the mirror or focusing screens.

Focusing Screens

Use only screens designated for use in the D2H.

238