Nikon D2H manual Custom Setting f7 No CF Card?, 205

Highlight f6 Buttons and dials in the second level of the CSM menu (

172)and press the multi selector to the right. Press the multi selector up or down to highlight an option, then press to the right to make a selection.

Option Description

Default Changes to settings made by rotating command dial while button is held (default) down.

Settings can be changed by rotating command dial even after button is re- leased. To put change into effect and return to normal operation, press but-

ton again, press shutter-release button halfway, or press , , , , Hold ISO, QUAL, or WB button. Unless auto meter off is set to No limit or the

camera is powered by optional EH-6 AC adapter, normal functioning will be restored automatically if no operations are performed for about 20 s.

Menu Guide—Custom Settings

Custom Setting f7: No CF Card?

This option can be used to enable the shutter release when no memory card is inserted in the camera. Note that when photographs are being captured to a computer using Nikon Capture 4 Camera Control, photographs are not recorded to the camera memory card and the shutter release will be enabled regardless of the setting chosen for this option.

CSM MENU

f7 Disable shutter if no CF card

ON On OK

OFF Off

Highlight f7 No CF card? in the second level of the CSM menu ( 172) and press the multi selector to the right. Press the multi selector up or down to highlight an option, then press to the right to make a selection.

Option Description

On

(default) Shutter-release button disabled when no memory card is inserted.

Off Shutter-release button enabled even when no memory card is inserted.

205