Nikon D2H manual 235

Remote	The D2H is equipped with a ten-pin remote
terminal	terminal for remote control and automatic
accessories	photography. The terminal is provided with
	a cap, which protects the contacts when the
	terminal is not in use. The following acces-
	sories can be used:
Accessory	Description	Length*

Technical Notes

MC-20

Remote Cord

MC-21

Extension Cord

MC-22

Remote Cord

MC-23

Connecting

Cord

MC-25

Adapter Cord

MC-30

Remote Cord

ML-2 Modulite

Remote

Control Set

ML-3 Modulite

Remote

Control Set

Remote shutter release; can be used to reduce camera shake. Equipped with time-exposure and timer features, emitting a beep once a second while the shutter is open.

Can be connected to MC-series 20, 22, 25, or 30.

Remote shutter release with blue, yellow, and black termi- nals for connection to a remote shutter-triggering device, allowing control via sound or electronic signals.

Connects two D2H cameras for simultaneous operation.

Ten-pin to two-pin adapter cord for connection to devices with two-pin terminals, including the MW-2 radio control set, MT-2 intervalometer, and ML-2 modulite control set.

Remote shutter release; can be used to reduce camera shake or keep the shutter open during a time exposure.

Allows infrared remote control at ranges of up to 100 m (328´). Use multiple units for remote control over greater distances. Requires MC-25 adapter cord.

Allows infrared remote control at ranges of up to 8 m (26´).

80cm (2´7˝)

3m

(9´10˝)

1m (3´3˝)

40cm (1´4˝)

20cm

(8˝)

80cm (2´7˝)

—

—

—Optional Accessories

* All figures are approximate.

235