Nikon D2H manual Attach the Camera Strap, Monitor Cover, EN-EL4 Batteries

1

Introduction—First Steps

Step 1—Attach the Camera Strap

Attach the camera strap securely to the two eyelets on the camera body as shown below.

The Monitor Cover

A clear plastic cover (the BM-3 LCD monitor cover) is provided with the camera to keep the monitor clean, and to protect the monitor when the camera is not in use or when you are transporting the camera. To re- move the monitor cover, hold the camera firmly, take the cover by its edges, and pull the bottom of the cover gently outwards as shown at right (￿). Once the cover is unlatched, you can move it slightly away from the monitor and then remove it as shown (￿).

To replace the cover for shooting or storage, insert the two projections on the top of the cover into the match- ing indentations above the camera monitor (￿), then press the bottom of the cover until you hear it click into place (￿).

A/V

OUT

DCIN

A/V

OUT

DC IN

A/V

OUT

DCIN

EN-EL4 Batteries ( 17)

EN-EL4 rechargeable Li-ion batteries can provide compatible devices with information on battery charge state, enabling the MH-21 Quick Charger to display the current charge level and charge the battery appropriately. When the EN-EL4 is inserted in the camera, the battery charge state is shown in six levels. Detailed information on bat- tery charge, battery life, and the number of pictures taken since the battery was last charged can be viewed using the Battery info option in the setup menu ( 216).

16