22
Introduction—First Steps
No Memory Card
If no memory card is inserted in the camera when a
charged EN-EL4 battery is inserted or the camera is
pow ered by an AC adapt er,
will appear in the
ex po sure-count displays in the control panel and view-
fi nder
.

Step 6—Insert a Memory Card

In place of fi lm, the D2H uses CompactFlash memory cards or microdrive
cards to store photographs. For a list of approved mem o ry cards, see “Tech-
nical Notes: Approved Memory Cards” ( 236).
6.1 Turn the cam era off
Turn the cam era off before inserting or re-
mov ing mem o ry cards.
6.2 Open the card slot cover
Open the door protecting the card-slot cov-
er release button () and press the release
button () to open the card slot ().
1
2
3
6.3 Insert a memory card
Insert the memory card with the rear label
toward the monitor (). When the memo-
ry card is fully inserted, the access lamp will
light briefl y and the eject button will pop up
(). Close the card slot cover.
Inserting Memory Cards
Insert the memory card terminals fi rst. In-
serting the card upside down or backwards
could damage the camera or the card.
Check to be sure that the card is in the cor-
rect orientation.
1
2
6
Di rec tion of
insertion
Rear
label
Ter mi nals