Nikon D2H manual Copying White Balance from d-0 to Presets d-1 d-4

d-1 :

d-1

d-3

d-0

SHOOTING MENU White bal.

White bal. preset

d-1 Set

Edit comment Select image

Copy d-0

SHOOTING MENU Select Set

Taking Photographs—White Balance

Press the center of the multi selector to copy	SHOOTING MENU
4 the white balance value for the highlighted	Select		Set
photograph to the selected preset and return	d-0	d-1	d-2
to the thumbnail display. If the highlighted
photograph has a comment, the comment		d-3	d-4
will be copied to the comment for the selected
	d-1 :
preset.

Copying White Balance from d-0 to Presets d-1 – d-4

To copy a measured value for white balance	SHOOTING MENU
from d-0 to any of the other presets (d-1 – d-4),	White bal.
	White bal. preset
highlight the destination preset in the thumbnail
	d-1
display and press the center of the multi selector	Set	OK
as described in steps 1–3 on page 61. The menu	Edit comment
	Select image
shown at right will be displayed.
	Copy d-0

1 Press the multi selector up or down to high- light Copy d-0.

2 Press the multi selector to the right to copy white balance from d-0 to the selected preset and return to the thumbnail display. If com- ment has been created for d-0, the comment will be copied to the comment for the selected preset.

OK

d-2

d-4

Nikon Capture 4

Nikon Capture 4 (available separately) can be used to edit white balance when RAW photographs taken with the D2H are displayed on a computer. The edited value can be copied directly to a white balance preset while the camera is connected to a computer, or the image can be saved to the camera memory card and the white balance value copied using the Select image option in the preset menu. Any comments created with Nikon Capture 4 will also be copied to the comment for the selected preset.

64