Nikon D2H manual Insert the Battery, Removing the Battery, Camera Off Display

2

Step 2—Insert the Battery

The D2H is powered by a rechargeable Nikon EN-EL4 Li-ion battery (provided).

2.1 Charge the battery

The EN-EL4 is not fully charged at shipment. To maximize shooting time, charge the battery in the supplied MH-21 quick charger before use (see the MH-21 instruction manual for details). About 100 minutes are required to fully recharge the battery when no charge remains.

2.2 Turn the camera off

Turn the camera off before inserting or re- moving batteries.

2.3 Remove the battery-chamber cover Turn the battery-chamber cover latch to the open position () and remove the battery- chamber cover.

2.4 Attach the battery cover to the battery The battery can be charged with the cover attached. See the instructions provided with the EN-EL4 for details.

2.5 Insert the battery

Insert the battery as shown at right.

2.6 Latch the battery-chamber cover

To prevent the battery from being dislodged during operation, be sure the cover is se- curely latched.

Removing the Battery

Before removing the battery, turn the camera off and rotate the battery-chamber cover latch to the open position ( ).

Camera Off Display

If a battery and memory card are inserted, the frame count and number of exposures remaining will be dis- played even when the camera is off (with some memory cards, it may be necessary to turn the camera on to view the frame count and number of exposures remaining).

Introduction—First Steps

17