Nikon D2H manual LCD Brightness, Mirror Lock-up, 208, Cleaning

Menu Guide—The Setup Menu

LCD Brightness

To adjust monitor brightness, highlight LCD brightness in the setup menu ( 206) and press the multi selector to the right. The menu shown at right will be displayed. Press the multi selector up to increase brightness, down to decrease. The number to the right of the display indicates the current brightness level, with +2 the brightest set- ting and –2 the darkest. Press the multi selector to the right to complete the operation and return to the setup menu.

SET UP
LCD brightness	OK

0

Mirror Lock-up

This option is used to lock the mirror in the up po- sition to allow inspection or cleaning of the low- pass filter that protects the LBCAST image sensor. See “Technical Notes: Caring for the Camera and Battery” ( 240).

SET UP

Mirror lock-up

OFF OFF OK

ON Image sensor cleaning

Highlight Mirror lock-upin the setup menu ( 206) and press the multi selector to the right. Press the multi selector up or down to highlight an op- tion, then press to the right to make a selection.

Option

OFF

Image sensor

cleaning

Description

Mirror functions normally.

When shutter is released, mirror is locked in up position and blink- ing “– – – – – – ” is displayed in top control panel. Mirror will return to down position when camera is turned off. To ensure power is available to lower mirror, this option is only available when camera is powered by EH-6 AC adapter.

208