Nikon D2H manual Custom Settings, 170, Fine-Tuning Camera Settings, Group

Custom Settings

a1–a8

b1–b6

c1–c5

d1–d7

e1–e8

f1–f7

CSM MENU

a1 AF-C mode priority

a2 AF-S mode priority

a3 Group dynamic AF

a4 Disable Lock-On

a5 AF activation

a6 Focus area Illum

a7 Focus area

a8 Vertical AF-ON

ON

ON

OFF

Custom Settings

Fine-Tuning Camera Settings

Menu Guide

Custom settings are used to fine-tune a variety of camera settings to suit the user’s preferences, creating combinations of settings that differ from the fac- tory defaults in effect at the time your camera was purchased. In addition to Custom Settings C (Bank select) and R (Menu reset), settings in the CSM

(Custom Settings) menu are divided into the following six groups:

—Custom Settings

CSM MENU

C Bank select A

RMenu reset a Autofocus

b Metering/Exposure

c Timers/AE&AF Lock d Shooting/Display

e Bracketing/Flash f Controls

Group

aAutofocus

bMetering/Exposure

cTimers/AE&AF Lock

dShooting/Display

eBracketing/Flash

f Controls

Press the multi selector up or down to highlight the desired group and then press the multi se- lector to the right. The full list of Custom Set- tings a1–f7 will be displayed, starting with the

settings in the selected group. To select a setting in a different group, press the multi selector up or down scroll until the desired setting is displayed,

or press the multi selector to the left to return the

top menu and select a different group. Custom Setting a1 (AF-C mode pri- ority) and f7 (No CF card?) are linked: pressing the multi selector up when Custom Setting a1 is highlighted displays Custom Setting f7, while pressing the multi selector down while Custom Setting f7 is highlighted displays Cus- tom Setting a1.

Using the Multi Selector

The multi selector can be used at any time when the monitor is on. The focus selector lock switch only takes effect when the monitor is off.

170