![](/images/new-backgrounds/1126282/12628263x1.webp)
32 Rerecording (Tape Duplication)
These instructions show you how to copy tapes using two MVR650MG/17 VCRs. Different VCRs may operate differently.
1.Audio cables from AUDIO OUT Jacks of VCR 1 to AUDIO IN Jacks of VCR 2
VCR 1
Playing VCR
|
| VCR 2 | Recording VCR |
|
| |
AUDIO | ANT | AUDIO | ANT | |||
IN | IN | |||||
| L |
| L | |||
|
|
|
| |||
OUT | IN |
| OUT | IN |
| |
| R |
|
| R |
| |
VIDEO | OUT | VIDEO | OUT | |||
OUT | IN |
| OUT | IN |
|
2.Video cable from VIDEO OUT Jack of VCR 1 to VIDEO IN Jack of VCR 2
3.RF coaxial cable from the OUT
jack of VCR 2 to the TV’s ANTEN- NA IN Jack
1 Make the connections shown above.
2 VCR 1 will play your tape. Insert a prerecorded tape in VCR 1. If the tape does not have a record tab, play begins. If this happens, press STOP/EJECT on VCR 1 once.
3 VCR 2 will record your tape. Insert a blank tape in VCR 2. Make sure the record tab is intact (see page five). Make sure VCR 2 is on and in VCR position. (The green VCR/TV light will appear. If it does not, press VCR/TV once.)
4 Turn on the TV and set it to channel 3 or 4 (the RF output channel of VCR 2). See page seven.
5 Point the remote at VCR 2. Press 0, 0, 1 or 0, 0, 2. (See Helpful Hints at right.)
6 Point the remote at VCR 2. Use SPEED to select SP or SLP.
7 Press PLAY on VCR 1 and RECORD on VCR 2 at the same time.
8 To stop recording, press STOP/EJECT on VCR 2 once, then stop the tape on VCR 1.
Helpful Hints
•If you connected another VCR to the AUDIO/VIDEO IN jacks on the back of VCR 2, press 0, 0, 1 at step 5. L1 will appear on the TV.
•If you connected another VCR to the AUDIO/VIDEO In jacks on front of VCR 2, press 0, 0, 2 at step 5. L2 will appear on the TV.
•When the VCR is set to L1 or L2, the screen is blue.
•Unauthorized recording of copy- righted TV programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws. A
•Audio and video cables are not supplied.
•If you have the MVR440MG/17 or MVR450MG/17, connect one audio cable to the AUDIO OUT jack on VCR1 and to the AUDIO IN jack on VCR2.