![](/images/new-backgrounds/1126282/1262829x1.webp)
Before Using Your VCR 5
Putting Batteries in the Remote Control
1 Remove the battery compartment lid on the bottom of the remote by sliding the lid in the direction of the arrow.
2 Insert two AA batteries inside the battery compartment with their + and – ends aligned as indicated.
3 Replace the battery compartment lid.
1
2
3
Using the Remote Control
●Point the remote at the VCR’s remote sensor (see page 21) when using the remote to operate the VCR.
●Do not put objects between the remote and the VCR.
Recording Prevention
Videotapes have record tabs to ensure that recordings are not erased accidentally.
1
2 To allow recording, cover the hole with cellophane tape.
VCR maintenance
●In this VCR, use only tapes with the mark.
●Make sure any light adhesive
●Periodic maintenance is required to maintain your VCR’s excellent performance.This VCR has a
1
2
Helpful Hints
•Do not mix alkaline and man- ganese batteries.
•Do not mix old and new batteries.