Hookups with Cable Box/Satellite (cont’d) 9
ANT
AUDIO
VIDEO
IN
OUT
OUT IN
OUT
L
R
IN
IN OUT
75
ANT /
CABLE
With this connection:
●You may watch one channel while recording another.
●You may not record scrambled channels.
TV’sANTENNA
IN Jack
Cable Box/Satellite
VCR
• When you play a tape,set the
Cable Box/Satellite to the same
channel as the RF output channel
of the VCR.(See page seven.) Set
the TV to the Cable Box/Satellite
output channel (03 or 04).
Helpful Hint
12
3
Cable TV or
Satellite
Signal RF coaxial
cable
RF coaxial
cable
Connections
1Connect a Cable TV or Satellite signal to the VCR’s
ANT(enna) IN Jack.
2Use an RF coaxial cable (supplied) to connect the OUT Jack
on the VCR to the IN Jack on the Cable Box/Satellite.
3Use a second RF coaxial cable to connect the OUT Jack on
the Cable Box/Satellite to the ANTENNA IN Jack on the TV.
Recording One Channel/Watching Another
1Put the Cable Box/Satellite on the same channel as
the VCR’s RF output channel.The default is channel 3.
See page seven.
Set the TV to the Cable Box/Satellite output channel (03 or
04).
Then,with the VCR in VCR position (the green
VCR/TV light will appear on the display panel),use
CH to select the channel you want to record
at the VCR. Start the recording.
2Press VCR/TVonce to put the VCR in TV position.
(The VCR/TV light will disappear.)
3Select the channel you want to watch at the Cable
Box/Satellite.