Real-Time Counter Memory 35

You can reset the real-time counter to zero at a tape location you
want to refer to later.Make sure:
●The VCRis on and is in VCRposition.The VCR/TV light will
appear.If it does not, press VCR/TV once.
●There is a tape in the VCR.
1Play,fast forward, or rewind a tape to the location that you
would like to refer to later.Press STOP to stop the tape.
2Press CLEAR (repeatedly if necessary) to reset the
real-time counter to zero.
• Set the counter memory at one
location at a time.Setting the
counter to zero at a second loca-
tion will erase the previous setting.
• To erase the counter memory,
press MEMORY repeatedly so the
M disappears from the screen.
•MEMORY does not function if
AUTO REPEATis [ON].
See page 33.
Helpful Hints
2
1,4
3
CH
321
654
987
0
POWER
STATUS
SLOWREC MEMORY
SPEED
SEARCH MODESTILL/PAUSE
VCR/TV EJECT
MENU
CLEAR
REW
PLAY
STOP
F.FWD
3Press MEMORY so M appears on the screen beside
the real-time counter.
4To go to a tape location where the counter was reset
to zero,press REW or F.FWD when play is stopped.
When the tape reaches zero,it will stop. Press PLAY to
watch the tape.
M 0 :00 :00
0 :00 :00