VRZ342comb.QX33 4/7/99 10:06 PM Page 41
Setting Up the VCR Plus+ Programming System (cont’d) 41
2
Now, compare the channel numbers you have written in the VCR PLUS+ CH. and CABLE/TV CH. columns. For stations whose VCR Plus+ and Cable/TV channels do not match, you must tell the VCR the VCR Plus+ and Cable/TV channel numbers by following steps 3 - 7. Make each entry within 60 seconds of the previous entry.
3
Press the VCR button, then press the MENU button.
2 Examine the lists on page 40.
POWER |
| EJECT |
VCR/TV | SPEED | MEMORY |
REC/OTR |
| PAUSE/STILL |
4
Press the PLAY/o button or the STOP/p button to select VCR SET UP, then press the F.FWD/B button.
SELECT op CHOOSE B
→ REPEAT PLAY | OFF |
ON SCREEN MODE |
|
LANGUAGE |
|
VCR PLUS+ REF. MAP
DBS RECORD LINK OFF
TO END PUSH EXIT
5
7
3
REW
MENU
1
4
7
MUTE
VCR
PLAY
F.FWD
STOP
STATUS/EXIT | CLEAR |
2 3
CH.
5 6
89
0+100
VOL.
TV CBL/DBS
6
Press the PLAY/o button or the STOP/p button to select VCR PLUS+ REF. MAP, then press the F.FWD/B button.
VCR PLUS+ CROSS REF. MAP
VCR PLUS+ | CABLE/TV |
9898
9999
1 – – – –
22
TO SELECT CH PUSH op
THEN ENTER CH NO. TO END PUSH EXIT
| VCR PLUS+ |
|
VAR.SLOW | /ENTER | SLOW |
TRACKING | F.ADV | X2 PLAY |
QUICK TIME | INDEX REC END | SKIP |
| SEARCH |
|
6
Look at the lists you filled in on page 40. For stations whose VCR
Plus+ and Cable/TV channels do not match, press the PLAY/o button or the STOP/p button until the arrow is beside the VCR Plus+ channel you need. Then, press the Number buttons to enter the corresponding Cable/TV chan- nel from your list. (Enter a “0” before
Note: If you are using a Cable Box/DBS, the Cable/TV channel will be 03 or 04 (the Cable Box/DBS output channel) for every VCR Plus+ channel. You must set the Cable Box/DBS to the channel you want to record; leave the Cable Box/DBS on for the timer recording.
VCR PLUS+ CROSS REF. MAP
VCR PLUS+ | CABLE/TV |
9898
9999
1– – – –
22
TO SELECT CH PUSH op
THEN ENTER CH NO.
TO END PUSH EXIT
7
Press the STATUS/EXIT button.
Helpful Hints
•To erase a Cable/TV channel num- ber, repeat steps
Press the CLEAR button, then press the STATUS/EXIT button.
•To select line input for the Cable/TV channel, press 0,0. AUX will appear
•When you receive the VCR, all the VCR Plus+ channel numbers and Cable/TV channel numbers are the same.