VRZ342comb.QX33 4/7/99 10:06 PM Page 32
32 Recording
Read and follow the steps below to record a television program.
1
Turn on the TV and set it to channel 3 or 4, whichever the
1Turn on the TV.
2Insert a tape in the VCR.
CH3/CH4 switch on the back of the VCR is set to.
2
Insert a tape with its record tab intact in the VCR.
3
Press the VCR button.
4
If the VCR light appears on the display panel, go to step 5. If the
VCR light does not appear, press the VCR/TV button once.
5
Press the SPEED button until the desired tape speed appears briefly
| POWER |
|
|
4 | VCR/TV |
| SPEED |
REC/OTR |
|
| |
7 |
|
| PLAY |
REW |
| STOP | |
| MENU | STATUS/EXIT | |
| 1 | 2 | 3 |
| 4 | 5 | 6 |
| 7 | 8 | 9 |
3 | MUTE | 0 | +100 |
VCR | TV | CBL/DBS | |
|
| VCR PLUS+ | |
VAR.SLOW |
| /ENTER | |
| TRACKING |
| F.ADV |
EJECT
MEMORY
PAUSE/STILL
F.FWD
CLEAR
CH.
VOL.
SLOW
X2 PLAY
5
8
9
6
6
Use the CH(annel) o/p buttons or the Number buttons to select the channel to be recorded.
7
Press the REC(ord)/OTR button once to start recording. The REC(ord) light will appear.
8
To pause the recording, press the PAUSE/STILL button once. The REC(ord) light will flash. To resume recording, press the REC(ord)/OTR button or press the PAUSE/STILL button again. The REC(ord) light will come on again.
9
To stop recording, press the STOP/p button.
QUICK TIME INDEX REC END SKIP
SEARCH
Helpful Hints
•If you press the REC(ord)/OTR but- ton when there is not a tape in the VCR, NO CASSETTE will flash on- screen.
•If you press the REC(ord)/OTR but- ton while a tape without a record tab is in the VCR, the VCR will eject the tape and PROTECTED CAS- SETTE CANNOT RECORD will flash
•Other recording options are on pages 33 - 44.
•You can change the tape speed during a recording, but some distor- tion will appear on the tape.