Remote Control, Open the cover Insert batteries | Magnavox ZC357MGX

FUNCTIONAL OVERVIEW

Remote Control

Installing the Batteries in the Remote Control

Install the batteries (AAx2) matching the polarity indicated inside battery compartment of the remote control.

1Open the cover.

2Insert batteries.

Make sure to match + and - on the batteries to the marks indicated in the battery compartment.

Using a Remote Control

Keep in mind the following when using the remote control:

•Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit.

•Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the infrared sensor window of the unit.

•Remote control for different devices can interfere with each other. Avoid using remote control for other device located close to the unit.

•Replace the batteries when you notice a fall off in the operating range of the remote control.

•The maximum operable ranges from the unit are as follows.

-Line of sight: approx. 23 feet (7m)

-Either side of the center: approx. 16 feet (5m) within 30°

-Above: approx. 16 feet (5m) within 15°

-Below: approx. 10 feet (3m) within 30°

16 feet (5m)	23 feet (7m)	16 feet (5m)
30˚		30˚

3Close the cover.

Note

Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following:

•Do not mix new and old batteries together.

•Do not use different kinds of batteries together. Although they may look similar, different batteries may have different voltages.

•Make sure that the + and - ends of each battery match the indications in the battery compartment.

•Remove batteries from battery compartment that is not going to be used for a month or more.

•When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area.

•Do not recharge, short-circuit, heat, burn or disassemble batteries.

	1	14
	2																				15*

	3																				16


		17

	4	18
																									19

	5																					20

	6																						21

	7																							22

	8																								23

		24*
	9																								25
																	26
	10																								27

	11 12																				28

	13																				29

12 EN

Image 14

Magnavox ZC357MGX owner manual Open the cover Insert batteries, Close the cover, Using a Remote Control

Contents

ZC357MGX Press REC to start recording Press Stop C to stop recording Press REC Mode repeatedly to select a recording modeUse K/L to select the type Your TV Video cable Audio cable Basic Supports only 480i resolution Video cableAudio Audio cable Hdmi cable not included Safety Information Do not Open To Avoid the Hazards of Electrical Shock and Fire Safety InformationAvoid a place with drastic temperature changes Location and Handling Cleaning the disc lens Disc handling Supplied AccessoriesCleaning discs IR signal check Trademark Information Dolby Digital Recording Contents Contents Features Description refers to DVD+RW Description refers to DVD-RW FeaturesSymbol Description Functional Overview Front Panel Functional Overview Rear Panel Using a Remote Control Remote ControlInstalling the Batteries in the Remote Control Open the cover Insert batteries Setup button Confirm button Analog modeDigital mode REC Mode button Overview ConnectionAntenna Connection Required Higher Quality Standard Connection Connection to a TV with an Hdmi Compatible Port Connecting to a TV Using Component Video Out Jacks Connecting to a TV Using the S-Video Out Jack Connecting to a TV Using Audio / Video Jacks Connecting to a Cable / Satellite Box With this setup Connecting to a TV without Audio / Video Jacks Set channel 3 or Audio format disc Digital Audio ConnectionActual Output Digital Output Finding the Viewing Channel on Your TV Setting onBefore YOU Start Turn on your TV Hdmi Information Before YOU StartGuide to On-Screen Display / Menu MP3 Tag Information First, track name will be displayed Main Menu Cable Analog Initial SettingAntenna Cable Analog / Digital Channel Setting Auto Channel Scan Adding / Deleting Channels Channel SettingUse K / L to select Manual Channel Preset, then press OK Use K / L to select Channel, then press OK Select the channel number to delete Press Setup to exitSelect the channel number to add or delete Use K / L to select Add or Delete, then press OK Press Setup and turn the unit to Setting the ClockAuto Clock Setting Standby mode Use K / L to select Clock Setting, then press OK Setting the ClockManual Clock Setting Daylight Saving Time Channel Selection Tuner SettingsSwitching Analog Mode Digital Mode Press Audio to cycle through available audio languages Tuner SettingsSelecting TV Audio Audio Recording Output Stereo Selecting TV Audio cont’dBroadcast Disc Audio Service 1 to Service Use K / L to select Caption Service, then press OKSelect if you do not want DTV CC. This is the default DTV Closed Caption Use K / L to select ON, then press OK Use K / L to select User Setting, then press OKClosed Caption Style Edge Color Font SizeEdge Type Font Style Recordable Discs Recording ModeInformation on DVD Recording Unrecordable Discs Make Recording Compatible Setting for Auto ChapterBefore Recording Recording the DTV Closed Caption Desired channel to record Label facing upPress OPEN/CLOSE a to close the disc tray It may take a while to load Disc completely Press Stop C to exit the title list Press REC repeatedly until the desired length appear Use K / L to enter the date, then press B Timer RecordingPress Timer Use K / L to select New Program, then press OK Timer Recording Use K / L to select a recording mode Press STANDBAY-ON y Press Timer Check the information To stop the timer recording in progressHow to select a channel number for the timer recording Hints for Timer Recording Priority of Overlapped Settings Title Overwriting Unnecessary TitleOverwriting from the Beginning Overwriting in the Middle of the Title Overwrite recording a Existing title B After overwriting Overwriting Unnecessary TitleHints for Overwriting Overwrite recording a Existing title B Existing title C Connection to an External Device Settings for AN External DevicePress Setup to exit Use K / L to select Video, then Recording Settings for AN External DeviceRecording from an External Device To record from Press Cstop on the unit to stop Recording Setting a Disc to Protect Finalizing is completed Press Setup Use K / L to select Disc Edit, then press OKFinalizing a Disc Disc Edit menu will appear Playing the Discs on Other DVD Players Auto Finalizing Unplayable Discs Information on PlaybackPlayable Discs and Files Color Systems PBC playback control for Video CD Disc Playback Mode menu will appearInformation on Playback Hint for DVD Playback Press STANDBY-ON y Basic PlaybackDirect Playback Press Play B to start playback Then press OK Basic PlaybackPlayback from the Title List Use K / L to select a desired title Playback will start Use K / L to select Play, thenPress OK Refer to Resume Playback on Constant bit rate MP3Sampling frequency Upper limit Press Stop C to stop playback Using the Title / Disc MenuPause During playback, press Pause F Fast Forward / Fast Reverse Playback Special PlaybackResume Playback Rapid Playback Slow Forward / Slow Reverse Playback Special PlaybackStep by Step Playback Zoom Marker Setting Repeat Playback Program Playback Random PlaybackSlide Show Search Using H / GUsing Display Title / Chapter Search Audio CD SearchTime Search To move to the number next to , press B For DVD-video Audio soundtrack will switch Switching SubtitlesSwitching Audio Soundtrack Selecting the Format of Audio and Video Switching Virtual Surround SystemSwitching Camera Angles Reducing Block Noise Editing Discs Information on Disc EditingGuide to a Title List Press Title Press Title Editing DiscsDeleting a Title Use K / L to select Edit, then After this operation is completed, press Return to exit Editing DiscsPutting Names on Titles Guide to Edit Title Name Press Return twice to exit Setting Chapter MarksUse K / L to select Add, then press OK Submenu will appear Clearing Chapter Marks All chapter marks will be deleted Clearing Chapter Marks cont’dTo delete all chapter marks Hiding Chapters Chapter is now hidden Picture for thumbnail will be set Setting Pictures for ThumbnailsPress Return to exit Menu Dividing a TitleFollow steps 1 to 3 in Deleting a Use H, G, E, D, Pause Name, then press OK. e.g. DVD+RW When you finish entering a title name, pressPutting Name on Disc Window for entering a title name will appear Contents of the disc is now deleted Erasing Disc Making Edits Compatible List of Settings Contents List of Settings Items highlight is the default SAP Use K / L to select Playback, then press OK SetupsPlayback Use K / L to select a desired item, then press OK Playback cont’d SetupsParental Lock Default OFF Yes Subtitle Language Default OFF Disc Menu Language Default EnglishAudio Language Default Original Angle Icon Default on On pages 85-87 DisplayUse K / L to select a desired item Refer to Chip Use the Number buttons to enter the access passwordDisplay cont’d Mpaa Rating To set the rating Use the Number Buttons to enter new access passwordCanadian French Rating Video Progressive Scan Default OFFTV Aspect Default 43 Letter Box Selected item When you finish with the setting, press Setup to exit HDMI, then press Reset the setting to default Reset AllSelect Yes again using K / L , then press OK Your setting in recording will be initialized Troubleshooting Troubleshooting Repairing process MAY not work A case you intend to cancelOPEN/CLOSE a to take out the disc. The disc canceled during Unit does not operate 94 EN Language Code Language Code Glossary Recording SpecificationsGeneral Tuner Disco Grabable EspañolDiscos Reproducibles Disco no Grabable Conexión a un Televisor con un Puerto Compatible con Hdmi EspañolConexión Básica Modo Hdmi y señales efectivas de salida Para seleccionar un modo de Presione STANDBY-ON yNuevo OPEN/CLOSE a para cerrar la bandeja de discos Presione REC para iniciar la grabación Configurar una programación del Presione TimerConfigure una programación del Nuevo, y luego presione OK 1VMN26797 Customer ServiceTel