Magnavox ZC357MGX owner manual Initial Setting, Antenna, Cable Analog / Digital

Initial Setup

INITIAL SETTING

You need to follow these steps when you turn on this unit for the first time.

1 Follow the procedure in “Finding the Viewing Channel on Your TV” on page 21 to display “Initial Setup” menu.

2 Use [K / L] to select your desired language, then press [OK].

OSD Language

English

Français

Español

Select the language for Setup display.

3 Use [K / L] to select the type of broadcasting signal, then press [OK].

Initial Setup

Channel Preset

Make sure the antenna is connected to “ANTENNA IN” jack.

Antenna

Cable (Analog)

Cable (Analog / Digital)

Auto Preset will scan all terrestrial channels.

This may take a while to complete.

The unit will start getting channels available in your area.

Antenna:

(When using antenna)

The channels broadcasted in analog TV and digital TV are automatically scanned and memorized. Only the receivable channels in the area will be memorized.

Cable (Analog):

(When using basic cable)

The channels broadcasted in analog CATV are automatically scanned and memorized.

Cable (Analog / Digital):

(When using basic cable)

The channels broadcasted in analog CATV and digital CATV are automatically scanned and memorized.

CH 1

Auto Presetting Now

4 If a PBS (public broadcasting station) is available in your area, clock setting will automatically be performed and the correct clock will be displayed following the channel preset procedure.

Initial setting is then complete. Press [RETURN] to exit.

If a PBS (public broadcasting station) is not

available in your area, press [OK]. Then proceed to step 5 in“Manual Clock Setting” on page 30.

Introduction Connections Basic Setup Recording Playback Editing Function Setup Others

Español

EN 25