Magnavox ZC357MGX Unit does not operate, You press OPEN/CLOSE a, A case you intend to cancel

OTHERS

TROUBLESHOOTING

	Symptom		Remedy
The unit does not operate			• When static electricity, etc., causes the unit to operate abnormally, unplug
properly.			the unit and then plug it in again.
The disc tray does not open when			• It may take a few seconds for the disc tray to open after you have
you press [OPEN/CLOSE A].			recorded or edited a disc. This is because the unit is adding disc data to
			the disc.
“Repairing” appears on the TV			• If there is a power failure or unplugging during recording, finalizing,
screen.			formatting or editing (even after “Repairing” disappears), a repairing
			process will begin automatically just after turning the unit on again.
			It may take several minutes up to about several hours.
	Repairing
			• If you intend to cancel the repairing process, press [AOPEN/CLOSE]
In a case you intend to cancel the
repairing process.			on the front panel, then select “Yes” and press [OK]. After that, press
			[OPEN/CLOSE A] to take out the disc. The disc canceled during the
	Do you want to cancel a repairing process ?		repairing process MAY NOT work.
	When selecting “Yes”, the disc may not be
	usable.
		Yes
		No
	Repairing

Introduction Connections Basic Setup Recording Playback Editing Function Setup Others

Español

EN 93