Magnavox ZC357MGX owner manual Marker Setting, Repeat Playback

SPECIAL PLAYBACK

Marker Setting Repeat Playback

Introduction

This feature allows you to assign a specific point on a disc to be called back later.

1)During playback, press [DISPLAY] to bring up the display menu.

If the display menu is already shown, skip to step 2.

2)Use [{ / B] to select to display the marker list.

e.g.) DVD-video

1/ 5 1/ 5 0:01:00 / 1:23:45

DVD Video

3)Use [K / L] to select a desired marker number.

When it reaches the desired point, press [OK].

1/ 5 1/ 5 0:01:00 / 1:23:45

DVD Video

1---

2---

3---

4---

5---

6---

The title (track) number and the time will be displayed.

4)To return to the marker later:

Use [K / L] to select the desired marker number, then press [OK].

Note

•To clear a marker, select the marker number to be cleared, then press [CLEAR].

•All markers will be erased when you operate these operations listed below.

–Opening the disc tray

–Turning the unit to standby / off

–Record on a recordable disc

•You can mark up to 6 points.

•Marker setting is not available when you play back the video CD with PBC function.

Available repeat function may vary depending the discs.

1)During playback press [DISPLAY] to bring up the display menu, then proceed to step 2), or press [REPEAT] then proceed to step 3).

If the display menu is already shown, skip to step 2.

2)Use [{ / B] to select to display the selection menu.

1/ 5 1/ 5 0:01:00 / 1:23:45

DVD Video

3)Use [K / L] to select a desired repeat type, then press [OK].

The selected repeat playback will start. e.g.) DVD-video

OFF

Title

Chapter

A – B

e.g.) audio CD, video CD

OFF

Track

All

A – B

e.g.) MP3 / JPEG files

OFF

Track

All

Group

Title:

The current title will be played back repeatedly.

Chapter:

The current chapter will be played back repeatedly.

All:

The current disc will be played back repeatedly.

A-B:

Desired section can be played back repeatedly.

1)Use [K / L] to select “A-B”, then press [OK].

2)Press [OK] at the desired starting point A.

3)Press [OK] at the desired ending point B.

Track:

The current track or file will be played back repeatedly.

Group:

The current folder will be played back repeatedly.

Note

•Point B for the repeat A-B playback should be set within the same title or track as point A.

•To cancel the repeat playback, select “OFF” at step 3. The repeat setting will also be canceled when you stop playback.

•You cannot select “Group” during the random playback.

•Repeat playback is not available when you play back the video CD with PBC function.

•During the A-B repeat, if you reaches the point A with any reverse playback, the reverse playback will be canceled and the A-B repeat playback resumes from point A.

Connections Basic Setup Recording Playback Editing Function Setup Others

Español

EN 61