2.1: Mondel type MST/E spring applied,
2.2: There are two basic models of this versatile,
2.3: The type MST brake spring is contained within the actuator. The brake can be arranged to deliver a percentage of the maximum torque by rearranging the brake pivot pins to provide a different lever ratio.
2.4: The type MST/E has an external torque spring, which is infinitely adjustable down to less than 50% of maximum torque.
2.5: Construction and operation of both models is similar; they are available for wheel sizes 6” to 16”. A limited range of
2.6: A wide range of options is available; consult factory.
2.7: When the load cycle requires a larger than normal size, as is frequently the cause on crane bridge drives, type MST and MST/E brakes can be provided with torques lower than traditional for a given wheel size.
Except when specifically engineered and used in conjunction with Mondel Braketronic Controllers, type MST/E are more suited to crane bridge brakes.
2.8: The type MST and MST/E brakes can be supplied as
2.9: The standard actuator is weatherproof and dust proof. The electric motor is TENV construction, and the hydraulic section is fully sealed and
2.10: An optional breather unit can be installed to replace the standard filler plug for environments, which experience large temperature swings. The breather prevents pressure
2.11: For more demanding environments, special hardware, enclosures, paint and surface treatments are available.
IF YOU HAVE AN UNUSUAL APPLICATION, OR REQUIRE A RECOMMENDATION FOR A BRAKE SIZE AND TYPE CONTACT MAGNETEK.
8/17/2006 | Page 7 of 33 | MST/E Electric Shoe Brakes Manual |
|
|