ODSHR Series
Chase Installation
Insulation methods shown are optional for cold climate, not a requirement for unit operation.
Batt Insulation (cut out around firestop)
Firestop
Ceiling Level
Gas Line Access
(both sides) 
Outside Air Cover Plate
Termination Cap
Storm Collar
Pan Flashing
Draftstop
Ledge Bracket
Surround
Damper Control
Gas Line Knockout (both sides)
Screen
Grate
Firebox
Metal Safety
Strips (1,2 or 3)
FP554A
Fig. 2 Fireplace and chase parts identification.
NOTE: If the fireplace is a freestanding unit, it must be located a minimum of 10' from the opening of the firebox to a combustible structure.
A minimum height of 6'- 4" measured from the base of the firebox to the bottom of the termination cap is permitted.
6'4" | 10' | |
Min. | ||
Min. | ||
|
FP1001
Fig. 3 Freestanding installation.
4 | 20002264 |
