Majestic Appliances UVS33RP Decorative Frame Trims, Glass/Catalyst Kit, UVS33/36 Vent-FreeHeaters

UVS33/36 Vent-Free Heaters

Decorative Frame Trims

A selection of decorative frame trim kits are available for mounting around the outside of the appliance to en- hance its visual effect on the room. Installation instruc- tions for each decorative frame trim are included with the frame trim kit.

Unit	Kit Model
UVS33	DV33GTP, DV33GTA, DV33GTS,
	DV33TKP, DV33TKMP,
	DV33TKMA, DV33TKMS,
	DV33TKMB, DV33TKWP,
	DV33CBTK
UVS36	DV36GTP, DV36GTA, DV36TKP,
	DV36TKA, DV36KMP, DV36KMA
	DV36KWP, DV36KWA

Glass/Catalyst Kit

Only glass approved by CFM Corporation should be used on this fireplace.

•The use of any non-approved replacement glass will void all product warranties.

•Care must be taken to avoid breakage of the glass.

•Do not operate appliance with glass front re- moved, cracked or broken.

•Replacement glass (complete with gasket) is available through your CFM Corporation dealer and should only be installed by a licensed quali- fied service person.

UVS 36GCFK

1.Turn unit "OFF".

2.Remove the top louvre. Refer to Page 11, Figure 15.

3.Remove the window frame. Refer to Page 11, Figure 16.

4.Remove the deflector firebox by removing the three

(3)screws securing it to the firebox top. (Fig. 22)

5.Install a catalyst up through one of the rectangular holes in the firebox top. (Fig. 23)

6.While holding the catalyst in place, slide the cata- lyst bracket over the studs and secure with the nuts provided. (Fig. 23)

7.Repeat Steps 5 and 6 for second catalyst.

8.Install the deflector firebox with screws removed earlier.

9.Install the glass door as provided in kit.

10.Install the top louvre.

Installation complete.

Deflector Firebox

FP1477

Fig. 22 Remove deflector firebox.

Catalyst

Catalyst Bracket

NutsFP1478

Fig. 23 Install catalyst and bracket in place, secure with nuts provided.

20 20002211