Adjusting miter angle
Loosen the miter gauge installation screws
and adjust the miter gauge to the desired
angle
(0 to
45
degrees). Then tighten the
miter gauge installation screws securely.
CAUTION
:
After adjusting the miter angle, be sure to
securely. tighten the miter gauge installation screws
Switch action
To start the tool, press the "ON" button
while the key
is
pressed in. Press the"0FF"
button to stop.
When operating the key and switch buttons,
it
is
convenient to view them through the
window area in the fixed table.
CAUTION
:
When not using the tool, remove the key and store
it
in
a
secure place. This prevents
unauthorized operation.
16