ACCESSORIES
CAUTION :
These accessories or attachments are recommended for use with your Makita tool speci- fied in this manual. The use of any other accessoriesor attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner
Dado head set (Part No
Adado is cutting a rabbet or a wide groove into the workpiece. The dado head set con- sists of two outside cutters, five inside cutters and three rings.
Outside cutters | : | 6" diameter, | 1/8" thick, | 5/8" | arbor hole, 2 pcs. | |
Inside cutters | : | 6" | diameter, | 1/8" thick, | 5/8" | arbor hole, 4 pcs. |
Inside cutter | : | 6" | diameter, 1/16" thick, | 5/8" | arbor hole, 1 pc. | |
Rings |
|
|
|
| 518" | arbor hole, 3 pcs. |
Paper washers | : |
|
|
| 5/8" | arbor hole, 6 pcs. |
Various combinations of these cutters are used to cut grooves from 1/8" to 13/16" for use in making joints, tenoning, grooving, etc.
To install the dado head set, proceed as follows:
1:( Turn the tool off and unplug it before installing. (2; Remove the blade guard with the spreader.
3, Install the dado head set with the teeth pointing down a t the front of the table
25
