Finishingedges

I

To trim edges or make slight dimensional

 

adjustments, run the blade lightly along the

 

cut edges.

 

Metal cutting

Always use a suitable coolant (cuttingoil) when cutting metal. Failure to do so will cause significant blade wear. The underside of the workpiece can be greased instead of using a coolant.

Plastic base plate

Use the plastic base plate when cutting de- corative veneers, plastics, etc. It protects sensitive or delicate surfaces from damage. To replace the base plate, remove the four screws.

Anti-splintering device

To reduce the potential for workpiece surface splintering, the anti-splintering device can be used. Fit it into the base from below so that it surrounds the sides of the blade.

-Screw

Plastic base plate

ase

Anti -spIintering device

10

Page 10
Image 10
Makita 4305T, 4304T specifications Screw Plastic base plate Ase Anti -spIintering device