Guide rule (rip fence; optional accessory)

When cutting widths of under 150 mm (5-29/32") repeatedly, use of the guide rule will assure fast, clean, straight cuts. To install it, loosen the bolt on the front of the base. Slip in the guide rule and secure the bolt.

Circular guide (optional accessory)

Use of the circular guide insures clean, smooth cutting of circles under 200" (7-7/8")in radius. Insert the pin through the center hole and secure it with the threaded knob. Move the base of the tool fully forward. Then install the circular guide on the base in the same manner as the guide rule (rip fence).

Guide rule Y

0Threaded knob

Vacuum head (optional accessory)

Vacuum head

The vacuum head is recommended to per-

17-

form clean cutting operations. Install the

plastic cover on the tool by fitting it into

 

the notches in the tool.

 

To attach the vacuum head on the tool, insert the hook of the vacuum head into the hole in the base. The vacuum head can be installed on either left or right side of the base. Then connect a Makita vacuum cleaner to the vacuum head.

11

Page 11
Image 11
Makita 4304T, 4305T specifications Vacuum head optional accessory