VOLTAGE WARNING: Before connecting the tool t o a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same as that specified on the nameplate of the tool. A power source with voltage greater than that specified for the tool can result in SERIOUS INJURY t o the user - as well as damage t o the tool. If in doubt, DO NOT PLUG IN THE TOOL. Using a power source with voltage less than the nameplate rating is harmful t o the motor.
ADDITIONAL SAFETY RULES
1.Avoid cutting nails. Inspect for and remove all nails from the workpiece before operation.
2.Don't cut hollow pipe.
3.Do not cut oversize workpiece.
4.Check for the proper clearance beneath the workpiece before cutting so that the blade will not strike the floor, workbench, etc.
5.Always wear eye protection conforming with current national standard. Severe eye injury could result.
6.Hold the tool firmly.
7.Make sure cord is out of your way and not in the line of cut.
8.Make sure the blade is not contacting the workpiece before the switch is turned on.
9.Keep hands away from moving parts.
IO.When cutting through walls, floors or wherever "live" electrical wires may be encountered, DO NOT TOUCH ANY METAL PARTS OF THE TOOL! Hold the tool only by the insulated grasping surfaces to prevent electric shock if you cut through a "live" wire.
11.Do not leave the tool running. Operate the tool only when
12.Always switch off and wait for the blade to come t o a complete stop before removing the blade from the workpiece.
13.Do not touch the blade or the workpiece immediately after operation; they may be extremely hoc and could burn your skin.
SAVE THESE INSTRUCTIONS.
4
