For 4305T
1.Press the button to raise the blade installing knob.
2.Rotate the blade installing knob in the 0direction and the clamp on the blade holder will open. Open the clamp a l i t t l e more than the thickness of the blade to be installed.
3.With the blade teeth facing forward, insert the blade into the blade holder as far as it will go. Make sure that the back edge of the blade f i t s properly into the groove of the roller.
4.With the blade held against the blade holder, rotate the blade installing knob in the @ direction to tighten the clamp.
Blade i n s t a l l i n g k n o b
B u t t o n
Blade h o l d e r
t | R o l l e r |
Blade |
5.With the blade installing knob kept in this position, push it back down to i t s original position.
NOTE : Occasionally lubricate the roller.
Selecting the cutting action
This tool can be operated with an orbital or a straight line cutting action. To change the cutting action, just turn the lever to the desired cutting action position. Refer to the table below to help determine the appropriate cutting action.
Position | Cutting action |
0Straight line cutting action
ISmall orbit c u t t i n g action
IIMedium orbit cutting action
111Large orbit c u t t i n g action
Applications
For c u t t i n g mild steel, stainless steel and plastics. For clean c u t s in w o o d and plywood .
For c u t t i n g mild steel, aluminum and hard wood .
For c u t t i n g w o o d and plywood .
For fast c u t t i n g in aluminum and mild steel.
For fast c u t t i n g in w o o d and plywood .
6
