Bubble level
This tool is equipeed with a bubble level to
aid in holding the tool horizontally. Simply7Bubble level center the bubble in the sight window.
Screwdriving operation
Place the point of the driver bit in the screw head and apply pressure to the tool. Start the tool slowly and then increase the speed gradually. Release the trigger just as the screw bottoms out. The electric brake will then stop the tool immediately, pre- venting the screw and/or bit from being damaged.
NOTE :
0 Make sure that the driver bit is inserted straight in the screw head, or the screw and/or bit may be damaged.
owhen driving wood screws, predrill Pilot holes to make driving easier and to pre- vent splitting of the workpiece. See the chart.
3.1 (1/8")
3.5(9/64")
3.8(5/32")
4.5(11/64")
I | (3/32 - 3/32") | |
2.5 - 2.8 | ||
| ||
| (3132 - 7/64") | |
| 2.9 - 3.2 | |
| (7/64- 1/8") |
9
